Fire station 3175

[flatcat]

Hi,

Does anyone know if the new fire station doors (available as an extenstion pack from DS) are compatible with the old firestation 3175? I perhaps wanted to tack some onto the right hand side where the helipad is maybe

Only asking as I don't really like the look of the new fire station, and much prefer the old 3175 as it seems to look more spacious inside, and i will need lots of room for my new fire brigade

(Btw, I don't have either of the sets in question)

[playmofire]

I haven't got or had the 3175 but I have bought the 4819 fire station, I just haven't had time to build it up as yet (although Diane does know about it).  I've also got the parts to extend it to accommodate three fire engines but instead of getting the DS add-on I just bought the bits I wanted, missing out some pieces which I felt were unnecessary and actually in my view extended the fire station in a less useful way as each extension is staggered behind the previous one rather than being directly alongside it.  In addition, it was cheaper doing it this way!

As regards the DS add-on for the new fire station fitting the old one (or adding the parts I did), there should be no problem so long as there is a System-X support with holes for connectors on the side to which you're wanting to add the extension.

Although I haven't built the 4819 yet, looking at the two sets on playmoDB, I'd say they're about equal for space in the centre section (and maybe the 4819 is better here), but the 3175 has the little extension on the left.  Against that, the 3175 doesn't have a hose drying/drill tower which the 4819 does.  I intend to add a small extension to my 4819 on the side of the appliance bays which will act as a workshop/store area.

[flatcat]

My ideas were sought of to make a large station from both stations, by adding the doors on one side, with numerous helipads above, and a hose drying tower from the new station onto the 3175 somehow - although this will probably take some considerable problemsolving

The issue I have with the new station is that it all seems a bit 'open' what with the pole outside  in between the main building and hos tower, and this all makes it seem more for play value than diorama value with the old one if this makes any sense at all

[playmofire]

My ideas were sought of to make a large station from both stations, by adding the doors on one side, with numerous helipads above, and a hose drying tower from the new station onto the 3175 somehow - although this will probably take some considerable problemsolving

The issue I have with the new station is that it all seems a bit 'open' what with the pole outside  in between the main building and hos tower, and this all makes it seem more for play value than diorama value with the old one if this makes any sense at all

I see your point.  Your desired set up will also take up some considerable space! 

And I'm not sure about the numerous helipads.

[flatcat]

And I'm not sure about the numerous helipads.

The idea, or the practice?

[playmofire]

The idea, or the practice?

Both really.

[Bill Blackhurst]

I see your point.  Your desired set up will also take up some considerable space! 

And I'm not sure about the numerous helipads.

Most definitely  !

[flatcat]

Scrap that idea then - i'll just go and buy a normal 4819 and add some doors to it

I haven't got or had the 3175 but I have bought the 4819 fire station, I just haven't had time to build it up as yet (although Diane does know about it).  I've also got the parts to extend it to accommodate three fire engines but instead of getting the DS add-on I just bought the bits I wanted, missing out some pieces which I felt were unnecessary and actually in my view extended the fire station in a less useful way as each extension is staggered behind the previous one rather than being directly alongside it.  In addition, it was cheaper doing it this way!

I would like to know how you are going to add the extra doors with missing out bits and not staggering them. Are you going to post pics, Gordon?

[playmofire]

I would like to know how you are going to add the extra doors with missing out bits and not staggering them. Are you going to post pics, Gordon?

It's quite simple to add doors without staggering them, but, yes, I will post some pics.  The chances of getting the 4819 fire station built up in the near future are slim, but I can show how to do it using the small custom fire station I built (http://www.playmofriends.com/forum/index.php?topic=3576.0) or by just building up part of the 4819.  Watch this space!

[playmofire]

Hi Damo, I plan to take some pics this afternoon and post them later this weekend.