« previous next »
Pages: [1] 2   Go Down

Author Topic: Disassembling Hook & Ladder (3525)  (Read 6515 times)

Offline Rasputin

  • The Mad Monk
  • Playmo Master
  • *****
  • Posts: 9648
  • Gender: Male
Disassembling Hook & Ladder (3525)
« on: October 17, 2009, 17:07:48 »
Well in a lot I received a while ago there was this fire engine that was missing wheels, it had a broken area, one of the outriggers did not function, there was a rattle inside and really I just did not have any use for . I let is sit a while and I wanted to show how easy it is to take apart for painting/modifying, fixing, scrapping or just finding out what that annoying rattle is.



Flip her over and start looking for the tabs which hold the pieces together. On this one I was able to find 4



Now due to my humanly limitations I only have 2 arms and needed the help of something to spread the part while I pried the tabs open . I found a laundry clip taken apart had the desired wedge shape to use as the extra help I needed .

Logged
If you hear the sound of the bell which will tell you that Grigori has been killed, if it was your relations who have wrought my death, then no one in the family will remain alive. They will be killed by the Russian people. :prays:

Offline Rasputin

  • The Mad Monk
  • Playmo Master
  • *****
  • Posts: 9648
  • Gender: Male
Re: Disassembling Hook & Ladder (3525)
« Reply #1 on: October 17, 2009, 17:20:59 »
I inset the wedge in between the turn table and body and push it in till it is tight . Then with a flat screwdriver I pry on one tab . Then pushing the wedge in a bit further and leaving it in I repeat on the other side .



Now with both tabs undone I lift the front section up and the rear 2 tabs slide out




Now with the turn table off the lower drawers are exposed for me to gently pry their tabs up to remove them .



Logged
If you hear the sound of the bell which will tell you that Grigori has been killed, if it was your relations who have wrought my death, then no one in the family will remain alive. They will be killed by the Russian people. :prays:

Offline Rasputin

  • The Mad Monk
  • Playmo Master
  • *****
  • Posts: 9648
  • Gender: Male
Re: Disassembling Hook & Ladder (3525)
« Reply #2 on: October 17, 2009, 17:25:24 »
Now we can find the 2 other cab tabs and remove it as well , use your wedges . Ah ha look what was causing a rattle.



Now that the chassis is clear the problem of the non functional out-rigger is exposed



Now pry the out-riggers off

Logged
If you hear the sound of the bell which will tell you that Grigori has been killed, if it was your relations who have wrought my death, then no one in the family will remain alive. They will be killed by the Russian people. :prays:

Offline Rasputin

  • The Mad Monk
  • Playmo Master
  • *****
  • Posts: 9648
  • Gender: Male
Re: Disassembling Hook & Ladder (3525)
« Reply #3 on: October 17, 2009, 17:31:07 »
Now lets work on the turntable. Use the wedges and work this one apart




Now use the wedges to work on one side of the ladder . Once you take one side off the other will slip out



Use the wedge again to take the 4 tabs off and split the table in half



And there you have it all taken apart for repair or modifying or as I am going to do is scrap it for other projects

« Last Edit: October 17, 2009, 20:47:50 by Rasputin »
Logged
If you hear the sound of the bell which will tell you that Grigori has been killed, if it was your relations who have wrought my death, then no one in the family will remain alive. They will be killed by the Russian people. :prays:

Offline Bill Blackhurst

  • Playmo Master
  • *****
  • Posts: 6158
  • Gender: Male
Re: Disassembling Hook & Ladder (3525)
« Reply #4 on: October 17, 2009, 17:44:23 »
Congratulations Ras! I have gotten to the point since I have disassembled 12 of the 3526, & 3525 fire trucks recently, which come apart the same way as your 3781, to be able to do one in less than 5 minutes  :)9. You have done well on this project! I have found that wooden door shim wedges work very well also.
Logged
  Forget about all of the other stuff,....all we need is the reintroduction of the 3526 Fire Engine!

Offline Knight Train

  • Playmo Lover
  • ***
  • Posts: 326
  • Gender: Male
  • Knight in Training
Re: Disassembling Hook & Ladder (3525)
« Reply #5 on: October 17, 2009, 18:18:06 »
Great tutorial and pictures.  The clothspins are a great idea to wedge stuff apart.  I wish I had taken pictures when I took my DHL delivery truck apart, I spent over an hour getting the truck body off the base - 6 clips and the gas tank filler need to be removed at the same time.   I used plastic scrapers as wedges.


Logged
 

Offline Richard

  • Retired Playmobil
  • Wargamer
  • Playmo Master
  • *****
  • Posts: 4965
  • Gender: Male
    • Garden Wargaming
Re: Disassembling Hook & Ladder (3525)
« Reply #6 on: October 17, 2009, 18:31:14 »


Thanks, Ras!

Don't you just love to disassemble stuff?

My favorite thing to do at the Playmobil FunStore in Orlando (before they closed) was to disassemble their Klicky key chains while they were still in their plastic baggy see through packages ...  >:D

Logged

Offline playmovictorian

  • Playmo Master
  • *****
  • Posts: 5596
  • Gender: Male
  • Happy Little Victorians
    • @playmovictorianinsta
Re: Disassembling Hook & Ladder (3525)
« Reply #7 on: October 17, 2009, 19:21:17 »
Great tuto' Ras  :wow: :wow: :wow:

Karim :)
Logged
La, tout n'est qu'ordre et beaute, luxe, calme et volupte. L'Invitation au Voyage. Charles Baudelaire.1857.

Offline Rasputin

  • The Mad Monk
  • Playmo Master
  • *****
  • Posts: 9648
  • Gender: Male
Re: Disassembling Hook & Ladder (3525)
« Reply #8 on: October 17, 2009, 20:50:31 »
Quote from: Bill Blackhurst on October 17, 2009, 17:44:23
Congratulations Ras! I have gotten to the point since I have disassembled 12 of the 3526, & 3525 fire trucks recently, which come apart the same way as your 3781, to be able to do one in less than 5 minutes  :)9. You have done well on this project! I have found that wooden door shim wedges work very well also.

12  :o Now you do it in 5 minutes , by any chance do you do it blind folded like you see those guys who take their guns apart really fast  :lol:

Thank you for the compliment on this  :wow:

Logged
If you hear the sound of the bell which will tell you that Grigori has been killed, if it was your relations who have wrought my death, then no one in the family will remain alive. They will be killed by the Russian people. :prays:

Offline Rasputin

  • The Mad Monk
  • Playmo Master
  • *****
  • Posts: 9648
  • Gender: Male
Re: Disassembling Hook & Ladder (3525)
« Reply #9 on: October 17, 2009, 20:52:42 »
Quote from: Knight Train on October 17, 2009, 18:18:06
Great tutorial and pictures.  The clothspins are a great idea to wedge stuff apart.  I wish I had taken pictures when I took my DHL delivery truck apart, I spent over an hour getting the truck body off the base - 6 clips and the gas tank filler need to be removed at the same time.   I used plastic scrapers as wedges.




I have not really taken anything apart that I really do not have too many of yet . Your experience with the DHL will be taken into consideration and be one of the last I try  ;)

Thanks for the kind feedback
Logged
If you hear the sound of the bell which will tell you that Grigori has been killed, if it was your relations who have wrought my death, then no one in the family will remain alive. They will be killed by the Russian people. :prays:
Pages: [1] 2   Go Up
« previous next »