« previous next »
Pages: [1]   Go Down

Author Topic: Modifying RC buffer stop to work on LGB track  (Read 2049 times)

Offline batrugger

  • Playmo Pal
  • Posts: 23
Modifying RC buffer stop to work on LGB track
« on: February 01, 2023, 16:07:19 »
Since the old 4352 buffer stops for the brass LGB track are hard to find and expensive when I do, I got a 4391 buffer stop for the plastic RC track to see if I could modify it to work with the LGB track. It wasn’t too hard to do, basically two holes drilled, cut a groove, and it worked out pretty well. This was a rush job done with a big drill bit and a hacksaw blade so with proper tools it could be a lot cleaner, but once it’s put together, it’s not noticeable.













My



Logged

Offline Junker Jörg

  • Playmo Addict
  • ****
  • Posts: 579
  • Hier stehe ich, ich kann auch anders.
Re: Modifying RC buffer stop to work on LGB track
« Reply #1 on: February 01, 2023, 16:38:13 »
Schaut gut aus - nicely done!

jj:
Logged
Lust auf Bilder? => www.klickywelt.de (mit Anmeldung)
Fancy more pics? => www.klickywelt.de (sign in to see)

Offline playmofire

  • Klicky Firemeister
  • Playmo Guru
  • ******
  • Posts: 10924
  • Gender: Male
    • Copt Hewick Volunteer Fire Brigade - probably the world's smallest fire brigade!
Re: Modifying RC buffer stop to work on LGB track
« Reply #2 on: February 01, 2023, 19:15:04 »
Yes, certainly nicely done and good use of the LGB track connector.
Logged
“Today well-lived makes every yesterday a day of happiness to remember and every tomorrow a vision of hope.”

Offline batrugger

  • Playmo Pal
  • Posts: 23
Re: Modifying RC buffer stop to work on LGB track
« Reply #3 on: February 01, 2023, 20:07:14 »
Quote from: playmofire on February 01, 2023, 19:15:04
Yes, certainly nicely done and good use of the LGB track connector.


It is definitely needed. The rails are the same height as the plastic so they bump into the top edge. There was no other way I could figure out to secure the track
Logged

Offline Rasputin

  • The Mad Monk
  • Playmo Master
  • *****
  • Posts: 9620
  • Gender: Male
Re: Modifying RC buffer stop to work on LGB track
« Reply #4 on: February 03, 2023, 03:29:03 »
That’s very clever
Logged
If you hear the sound of the bell which will tell you that Grigori has been killed, if it was your relations who have wrought my death, then no one in the family will remain alive. They will be killed by the Russian people. :prays:
Pages: [1]   Go Up
« previous next »